CPR Series
CPR 165
◎FEATURES：
1. Particular design for drying section to optimize both of even drying and efficiency.
2. Giant drying section, speedy drying, power saving, premium quality of grains.
3. Spreader device and rotary valves control measurable loading capacity in circulating,
and make grains with even drying.
4. Max. thermal energy, drying rate increase, better quality and quantity, minimum cost.
5. Safety operation monitor system:
Motor overload protection, control fuse, full load buzzer, air pressure switch, flame sensor,
over heat sensor, over drying safety device in CS-R.
| Model | CPR-165-105 | CPR-165-135 | CPR-165-150 | CPR-165 | ||
| Capacity (kg) | Pulses, Corn (1liter=690g) | 7500~10400 | 7500~13350 | 7500~14850 | 7500~16350 | |
| Rapeseed (1liter=690g) | ||||||
| Wheat (1liter=680g) | ||||||
| Paddy (1liter=560g) | 6500~10400 | 6500~10850 | 6500~12050 | 6500~13250 | ||
| Dimension | Length (mm) | 4287 | ||||
| Width (mm) | 2745 | |||||
| Height (mm) | 7227 | 8449 | 9060 | 9671 | ||
| Net weight(kg)approx. | 2815 | 2990 | 3075 | 3170 | ||
| Burner | Type | Gun type | ||||
| Max. Combustion | 25 liter/hr | |||||
| Heat Source | Kerosene or Premium diesel | |||||
| Power Consumption | 3P, 220V/380V/415V/440V, 50/60Hz | |||||
| 6.45 kW | ||||||
| Function | Loading | Pulses, Rapeseed | 44 min (approx.) | 50 min (approx.) | 55 min (approx.) | 60 min (approx.) |
| Paddy | 50 min (approx.) | 60 min (approx.) | 66 min (approx.) | 72 min (approx.) | ||
| Discharging (Pulses, Rapeseed, Paddy) | 45 min (approx.) | 55 min (approx.) | 60 min (approx.) | 66 min (approx.) | ||
| Drying Rate | Commercial, Grains | 0.5~1.2%/hr | ||||
| Seed | Rapeseed 0.1~0.5%/hr Paddy, Wheat 0.2~1.0%/hr | |||||
| Safety Devices | Thermo-over realy, Air pressure switch, Full load buzzer, Timer, Control fuse, Flame sensor, Over heat sensor. | |||||
※Listed parameters and drying rate are for reference only and in accordance to grain with initial and target moisture content as following: pulses: 18% to 13%, paddy: 26% to 15%, wheat and corn: 30% to 12.5%. Actual value varies in correlation to ambient temperature, relative humidity, grain variety, hot air temperature, moisture content before and after drying. | ||||||